/************************************************************************
* IRC - Internet Relay Chat, doc/INSTALL
* Copyright (C) 1990,1991,1992, Jeff Trim, Mike Bolotski,
* Jarkko Oikarinen and Darren Reed.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 1, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
Installing IRC - The Internet Relay Chat Program
Overview of this document:
1) The config.h file
2) Editing the Makefile
3) Compiling IRC
4) The ircd.conf file
1) Edit the "config.h" file and make changes to the various #DEFINE's:
a) Copy the config.h.dist file to config.h before editing.
b) Define what type of UNIX your machine uses.
Pick the machine type which best describes your machine and change
the #undef to #define (if needed). Some flavours of Unix require no
#define and in such cases all others should be #undef'd.
c) DEBUGMODE
Define DEBUGMODE if you want to see the ircd debugging information
as the daemon is running. Normally this function will be undefined
as ircd produces a considerable amount of output. DEBUGMODE must be
defined for either of -t or -x command line options to work.
d) DPATH, SPATH, CPATH, MPATH, LPATH, PPATH
DPATH is provided so that the other pathnames (SPATH, CPATH, etc)
may be provided in just filename form. When the server starts, it
chdir's to DPATH before chroot or any other file operation, making
it the "current directory" for the server. This is where core files
will go if it core dumps.
Define SPATH to be the directory path to ircd. This is usually
/usr/local/bin/ircd, unless you don't have installation permission
there.
Define CPATH to be the directory path to the "irc.conf" file.
This path is usually /usr/local/lib/irc.conf. The format of this file
will be discussed later.
The LPATH #define should be set to "/dev/null" unless you plan to
debug the program. Note that the logfile grows very quickly.
Define MPATH to be the path to the 'motd' (message of the day) file
for the server. Keep in mind this is displayed whenever anyone
signs on to your server.
The PPATH is optional, but if defined, should point to a file which
either doesn't exist (but is creatable) or a previously used PPATH
file. It is used for storing the server's PID so a ps(1) isn't
necessary.
e) CHROOTDIR
To use the CHROOTDIR feature, make sure it is #define'd and that
the server is being run as root. The server will chroot to the
directory name provded by DPATH.
f) ENABLE_SUMMON, ENABLE_USERS
For security conscious server admins, they may wish to leave
ENABLE_USERS undefined, disabling the USERS command which can be used
to glean information the same as finger can. ENABLE_SUMMON toggles
whether the server will attempt to summon local users to irc by
writing a message similar to that from talk(1) to a user's tty.
g) SHOW_INVISIBLE_LUSERS, NO_DEFAULT_INVISIBLE
On large IRC networks, the number of invisible users is likely to
be large and reporting that number cause no pain. To aid and effect
this, SHOW_INVISIBLE_LUSERS is provided to cause the LUSERS command
to report the number of invisible users to all people and not just
operators. The NO_DEFAULT_INVISIBLE define is used to toggle whether
clients are automatically made invisible when they register.
h) OPER_KILL, OPER_REHASH, OPER_RESTART, LOCAL_KILL_ONLY
The three operator only commands, KILL, REHASH and RESTART, may all
be disabled to ensure that an operator who does not have the correct
privilidges does not have the power to cause untoward things to occur.
To further curb the actions of guest operators, LOCAL_KILL_ONLY can
be defined to only allow locally connected clients to be KILLed.
i) The rest of the user changable #define's should be pretty much self
explanatory in the config.h file. It is *NOT* recommended that any
of the file undef the line with "STOP STOP" in it be changed.
3) Configure and compile the code.
Edit the root Makefile for the server, uncomment/comment the correct
CFLAGS/IRCDLIBS lines as appropriate for your system.
Change DESTDIR to be the same as the path for DPATH in config.h.
Type "make". This will compile the server, the client, and the services.
At the end of this step, the server directory will contain 'ircd',
and the client directory will contain 'irc'. To get the server installed,
type "make install" which will build a default m4 file for preprocessing,
copy example.conf and put the server all in DESTDIR. The irc client and
a copy of the server will also be placed in BINDIR and the modes set
accordingly.
4) The ircd.conf file.
After installing the ircd and irc programs, edit the irc.conf file
as per the instructions in this section and install it in the
location you specified in the config.h file. There is a sample
conf file called example.conf in the /doc directory.
Appendix A describes the differences between IP addresses and host
names. If you are unfamiliar with this, you should probably scan
through it before proceeding.
The irc.conf file contains various records that specify configuration
options. The record types are as follows:
1. Server connections (C,N)
2. Machine information (M)
3. Client connections (I)
4. Default local server (U)
5. Operator priviliges (O)
6. Administrative info (A)
7. Excluded accounts (K)
8. Excluded machines (Q)
9. Connection Classes (Y)
10. Leaf connections (L)
11. Service connections (S)
12. Port connections (P)
13. Hub connections (H)
1. SERVER CONNECTIONS: How to connect to other servers
How other servers can connect to you
WARNING:
The hostnames used as examples are really only examples and
not meant to be used (simply because they don't work) in real life.
Now you must decide WHICH hosts you want to connect to and WHAT ORDER you
want to connect to them in. For my example let us assume I am on the
machine "rieska.oulu.fi" and I want to connect to irc daemons on 3 other
machines:
"garfield.mit.edu" - Tertiary Connection
"irc.nada.kth.se" - Secondary Connection
"nic.funet.fi" - Primary Connection
And I prefer to connect to them in that order, meaning I first want to
try connecting to "nic.funet.fi", then to "irc.nada.kth.edu", and
finally to "garfield.mit.edu". So if "nic.funet.fi" is down or
unreachable, the program will try to connect to "irc.nada.kth.se".
If irc.nada.kth.se is down it will try to connect to garfield and so forth.
PLEASE limit the number of hosts you will attempt to connect to down to 3.
This is because of two main reasons:
a) to save your server from causing extra load and delays
to users
b) to save internet from extra network traffic
(remember the old rwho program with traffic problems when
the number of machines increased).
The format for the CONNECT entry in the "irc.conf" is:
C::::
Field: 1 2 3 4 5
for example:
C:nic.funet.fi:passwd:nic.funet.fi:6667
- or -
C:128.214.6.100:passwd:nic.funet.fi:6667
- or -
C:root@nic.funet.fi:passwd:nic.funet.fi:6667
Explanation:
Each field is separated with a ":" charcter:
Field 1: Field 1 tells the IRC program which option is being configured.
"C" corresponds to a server Connect option.
Field 2: Specifies the host name or IP address of the machine to connect
to. If "user@" prefixes the actual hostname or IP address
the server will require that the remote username returned by
the ident server be the same as the one given before the "@".
Field 3: The password of the other host. A password must always be
present for the line to be recognized.
Field 4: The full hostname of the target machine. This is the name that
the TARGET server will identify itself with when you connect
to it. If you were connecting to nic.funet.fi you would receive
"nic.funet.fi" and that is what you should place in
this field.
Field 5: The INTERNET Port that you want to connect to on the TARGET
machine. Most of the time this will be set to "6667".
If this field is left blank, then no connections will
be attempted to the TARGET host, and your host will accept
connections FROM the TARGET host instead.
Some examples:
C:nic.funet.fi::nic.funet.fi:6667
This reads: Connect to host "nic.funet.fi", with no password
and expect this server to identify itself to you as
"nic.funet.fi". Your machine will connect to this host to
PORT 6667.
C:18.72.0.252:Jeff:garfield.mit.edu:6667
This reads: Connect to a host at address "18.72.0.252", using a
password of "Jeff". The TARGET server should identify
itself as "garfield.mit.edu". You will connect to Internet
Port 6667 on this host.
C:irc.nada.kth.se::irc.nada.kth.se
This reads: do not attempt to connect to "irc.nada.kth.se",
but if "irc.nada.kth.se" requests a connection,
allow it to connect.
Now back to our original problem, we wanted OUR server CONNECT to 3
hosts, "nic.funet.fi", "irc.nada.kth.se" and "garfield.mit.edu" in
that order. So as we enter these entries into the file they must be
done in REVERSE order of how we could want to connect to them.
Here's how it would look if we connected "nic.funet.fi" first:
C:garfield.mit.edu::garfield.mit.edu:6667
C:irc.nada.kth.se::irc.nada.kth.se:6667
C:nic.funet.fi::nic.funet.fi:6667
Ircd will attempt to connect to nic.funet.fi first, then to irc.nada
and finally to garfield.
Reciprocal entries:
Each "C" entry requires a corresponding 'N' entry that specifies
connection priviliges to other hosts. The 'N' entry contains
the password, if any, that you require other hosts to have before
they can connect to you. These entries are of the same format as
the "C" entries.
Let us assume that "garfield.mit.edu" connects to your server
and you want to place password authorization authorization on garfield.
The "N" entry would be:
N:garfield.mit.edu:golden:garfield.mit.edu
This line says: expect a connection from host "garfield.mit.edu",
and expect a login password of "golden"
and expect the host to identify itself as "garfield.mit.edu".
N:18.72.0.252::garfield.mit.edu
This line says: expect a Connection from host "18.72.0.252", and
don't expect login password. The connecting host should identify itself
as "garfield.mit.edu".
Wildcards domains:
To reduce the great amount of servers in IRCnet wildcard
DOMAINS were introduced in 2.6. To explain the usage of
wildcard domains we take an example of such:
*.de - a domain name matching all machines
in Germany.
Wildcard domains are useful in that ALL SERVERS in Germany
(or any other domain area) can be shown as one to the
rest of the world. Imagine 100 servers in Germany, it
would be incredible waste of netwotk bandwidth to broadcast
all of them to all servers around the world.
So wildcard domains are a great help, but how to use them ?
They can be defined in the N-line for a given connection,
in place of port number you write a magic number called
wildcard count.
Wildcard count tells you HOW MANY PARTS of your server's name
should be replaced by a wildcard. For example, your server's
name is "tolsun.oulu.fi" and you want to represent it as
"*.oulu.fi" to "nic.funet.fi". In this case the wildcard count
is 1, because only one word (tolsun) is replaced by a wildcard.
If the wildcard count would be 2, then the wildcard domain would
be "*.fi". Note that with wildcard name "*.fi" you could NOT
connect to "nic.funet.fi", because that would result in a server
name COLLISION (*.fi matches nic.funet.fi).
I advice you to not to use wildcard servers before you know
for sure how they are used, they are mostly beneficial for
backbones of countries and other large areas with common domain.
2. MACHINE INFORMATION
IRC needs to know a few things about your UNIX site, and the "M" command
specifies this information for IRC. The fomat of this command is:
M::xxx::
Field: 1 2 3 4 5
Explanation:
Field 1: "M" specifies a Machine description line
Field 2: The name of YOUR host adding any Internet DOMAINNAME that
might also be present.
Field 3: -- NOT USED --: Set to Value NULL (No spaces at ALL!).
Field 4: Geographic Location is used to say WHERE YOUR SEVRER is,
and gives people in other parts of the world a good
idea of where you are! If your server is in the USA, it is
usually best to say: , USA. Like for Denver
I say: "Denver Colorado, USA". Finnish sites (like
tolsun.oulu.fi generally say something like "Oulu, Finland".
Field 5: The Internet port your server will use. Should be set to
the same value as in the config.h file.
Example:
M:tolsun.oulu.fi::Oulu, Finland:6667
This line reads: My Host's name is "tolsun.oulu.fi" and
my site is located in "Oulu, Finland". My ircd will use
Internet Port 6667.
M:orion.cair.du.edu::Denver Colorado, USA:6667
This line reads: My Hosts name is "orion.cair.du.edu"
and my site is located in "Denver Colorado, USA".
I have defined Internet Port number "6667" to be used
as my IRCD Socket Port.
3. CLIENT CONNECTIONS - How to let clients connect to your IRCD.
A client is a program that connects to the ircd daemon (ircd). Currently
there are clients written in C and in GNU Emacs Lisp. The "irc"
program is the C client. Each person that talks via IRC is running
their own client.
The irc.conf files contains entries that specify which clients are allowed
to connect to your irc daemon. Obviously you want to allow your cwn
machine's clients to connect. You may want to allow clients from
other sites to connect. These remote clients will use your server
as a connection point. All messages sent by these clients will pass
through your machine.
The format of this entry in the conf file is:
I::::
Field:1 2 3 4 5
For example, if you were installing IRC on tolsun.oulu.fi and you wanted
to allow examples sake let us assume you were making this file for
tolsun and you wanted to let your own clients to connect to your
server, you would add this entry to the file:
I:128.214.5.6::tolsun.oulu.fi
or
I:tolsun.oulu.fi::tolsun.oulu.fi
If you wanted to let remote clients connect, you could add the
following lines:
I:*.du.edu::*.du.edu
Allow any clients from machines whose names end in "du.edu" to connect
with no password.
I:128.214.6.100::nic.funet.fi
Allow clients from a machine with that IP number and the name
nic.funet.fi to connect.
I:*.tut.fi:secret:*.tut.fi
Allow clients from machines matching *.tut.fi to connect
with the password 'secret'.
I:*::*
Allow anyone from anywhere to connect your server.
This is the easiest way, but it also allows people to for example
dump files to your server, or connect 1000 (or how many open
sockets per process your OS allows) clients to your machine
and take your network ports. Of course the same things can be
done by simply telnetting to your machine's SMTP port (for example).
NEW!!!
As of the 2.7.2d version of the server, the server is able to accept
connections on multiple ports. I-lines are required for each P-line
to allow connections to be accepted. For unix sockets, this means
either adding I:/path/port::/path/port or some variation (wildcards
are recognised here). For internet ports, there must be an I-line
which allows the host access as normal, but the port field of the
I-line must match that of the port of the socket accepting the
connectiion. A port number of 0 is a wildcard (matches all ports).
4. DEFAULT HOSTS (for local clients)
This defines the default connection for the irc client. If you are
running an ircd server on the same machine, you will want to define
this command to connect to your own host. If your site is not running
a server then this command should contain the TARGET host's connection
information and password (if any). The format for this command is:
U::::
Field: 1 2 3 4 5
For example:
U:tolsun.oulu.fi::tolsun.oulu.fi:6667
U:128.214.5.6::tolsun.oulu.fi:6667
U:tolsun.oulu.fi::tolsun.oulu.fi
If the port number is omitted, irc will default to using 6667.
5. OPERATOR Privileges: How to become the IRC administrator on your site
To become an IRC Administrator, IRC must know who is authorized to become
an operator and what their "Nickname" and "Password" is. To add this
information, EDIT your "irc.conf" file and add the following command
line to it:
O:::::
Field: 1 2 3 4 5 6
Explanation:
Field 1: Speficies Operator record. If you use capital letter ('O')
in it, it specifies a global operator. Small letter ('o')
specifies a local operator. Local operator has basically the
same rights except global operator with some restrictions.
Field 2: Tells IRC which host you have the privileges FROM. This
means that you should be logged into this host when you
ask for the priviliges. If you specify "tolsun.oulu.fi"
then IRC will expect your CLIENT to be connected at
"tolsun.oulu.fi" - when you ask for OPERATOR privileges
from "tolsun.oulu.fi". You cannot be logged in at any
other host and be able to use your OPERATOR privileges
at tolsun, only when you are connected at TOLSUN will this
work - this is a safeguard against unauthorized sites.
Field 3: If your AUTHORIZATION Password - this is the password that
let's IRC know you are who you say you are! Never tell anyone
your password and always keep the "irc.conf" file protected
from all of the other users.
Field 4: The Nickname you usually go by - but you can make this what
you want. It is better to make this a NICKNAME that no one
else knows, but anything will do. I usually use my own
loginname.
Field 5: Unused.
Field 6: The class field should refer to an existing class (preferably
having a lower number than that for the relevant I-line) and
determines the maximum number of simultaneous uses of the
O-line allowable through the max. links field in the Y-line.
Example:
O:orion.cair.du.edu:pyunxc:Jeff
There is an OPERATOR at "orion.cair.du.edu" that can get
Operator priviliges if he specifies a password of "pyunxc"
and uses a NICKNAME of "Jeff".
6. ADMINISTRATIVE INFORMATION
The "A" command is used for administrative information about a site.
The e-mail address of the person running the server should be included
here in case problems arise.
A:::
Field: 1 2 3 4
Explanation:
Field 1: "A" specifies an Admin record.
Field 2: Use this field to say tell your FULL NAME and where in the
world your machine is. Be sure to add your City,
State/Province and Country.
Field 3: Use this field to specify your Electronic Mailing Address
preferably your Internet Mailing Address. If you have
a UUCP or ARAPnet address - please add that as well. Be
sure to add any extra DOMAIN information that is needed,
for example "mail jtrim@orion" probably won't work as a
mail address to me if you happen to be in Alaska. But
"mail jtrim@orion.cair.du.edu" would work because you
know that "orion" is part of the DOMAIN "cair.du.edu".
So be sure to add your DOMAINNAMES to your mailing addresses.
Field 4: Is really an OTHER field - you can add what you want here,
Examples (the line is just one line in the confuration file, here it
is cut into two lines to make it clearer to read):
A:Jeff Trim - Denver Colorado, USA:INET jtrim@orion.cair.du.edu UUCP {hao,
isis}!udenva!jtrim:Terve! Heippa! Have you said hello in Finnish today?;)
Would look like this when printed out with the /admin command:
Jeff Trim - Denver Colorado, USA
INET jtrim@orion.cair.du.edu UUCP {hao,isis}!udenva!jtrim
Terve! Hei! Heippa! Have you said hello in Finnish today? ;)
Note that the A record cannot be split across multiple lines; it will
typically be longer than 80 characters and will therefore wrap around
the screen.
7. REMOVING A USER FROM IRC Remove an errant user from IRC on your site.
Obviously it is hoped that you wouldn't have to use this command.
Unfortunately sometimes a user can become unmanageable and this is your
only recourse - the KILL USER command. THIS COMMAND ONLY AFFECTS YOUR
SERVER - If this user can connect to another SERVER somewhere else in
the IRC-Network then you would have to talk to the administrator on that
site to disable his access from that IRCD Server as well.
The format of this command is:
K:::
Field: 1 2 3 4
Explanation:
Field 1: "K" tells the IRCD that you are making a KILL USER command
entry.
Field 2: In this field you specify the Hostname that the user is
connecting from. If you wanted to REMOVE connects
to IRC from "orion.cair.du.edu" then you would want to enter
"orion.cair.du.edu". If you want to REMOVE ALL HOSTS
access you can use '*' (Wild Card notation) and no matter
what host the USERNAME (specified in Field 4) connects from
s/he will be denied access. Removing all hosts isn't
very smart thing to do though, why would you run an ircd
if you allow nobody to connect to it anyways ?
Field 3: Either leave this field empty (no spaces), then then lines
is active continuously for the specified user/host machine.
You may also specify intervals during the line should be
active, see examples above.
Field 4: The USERNAME of the user you want removed from IRC. For
example 'root'.
Some Examples:
K:orion.cair.du.edu::jtrim
If user 'jtrim' connects to IRC from host "orion.cair.du.edu"
then IMMEDIATELY REMOVE HIM from my IRCD.
K:*.cair.du.edu::root
If user 'root' connects to IRC from any host that has the
suffix "cair.du.edu" - then IMMEDIATELY REMOVE THEM from
my IRCD.
K:*::vijay
This line reads "I don't care WHAT HOST user 'vijay' is on,
I will NEVER allow username 'vijay' to login to my IRCD.
K:*.oulu.fi:0800-1200,1400-1900:*
This disallows all users from hosts with enddomain 'oulu.fi'
access to your server between 8 and 12am, 2 and 7pm.
Users get kicked off if they're already signed on when the
line becomes active (they'll get a warning 5 minutes ago).
8. Disallowing SERVERS in your irc net.
In some cases people run into difficulties in net administration.
For one reason or another you do not want a certain server to be
in your net (for example because of the security holes it opens
for every server if it's not secured carefully). In that case
you should use Q-lines in your server. When you specify a server
name in Q-line, everytime some server link tries to introduce you
a server (remember, all server names are broadcast around the net),
that name is checked if it matches the Q-lines in your server.
If it matches, then your server disconnects the link. Note that
just placing Q-lines to your server probably results in your server
being left alone, unless other servers have agreed to have the
same Q-line in their ircd configuration files as well.
Example:
Q::of the security holes:foo.bar.baz
This command excludes a server named "foo.bar.baz", the reason
is given to be security holes (you should give a reason, it is
polite). The first field is unused, so leave it empty.
9. Connection Classes.
To enable more efficient use of MAXIMUM_LINKS, connection classes
were implemented. To give a connection a class, add another field
(a sixth) to the C/N lines for a particular server.
Each line for a server should have the same number as the sixth
field. If it is absent, the server deaults it to 0, using the
defaults from the config.h file. To define a connection class,
you need to include a Y: line in the irc.conf file. This enables
you to define the ping frequency, connection frequency and maximum
number of links that class should have. Currently, the Y: line MUST
appear in the irc.conf file BEFORE it is used in any other way.
The format for the line is:
Y:::::
Field: 1 2 3 4 5 6
Field 2: This is the class number which gains the following attributes
and should match that which is on the end of the C/N line.
Field 3: This field defines how long the server will let the connection
remain "silent" before sending a PING message to make sure it is still
alive. Unless you are sure of what you are doing, use the default value
which is in your config.h file.
Field 4: By changing this number, you change how often your server
checks to see if it can connect to this server. If you want to check
very occasionally, use a large value, but if it is an important
connection, you might want a smaller value so that you connect to it
as soon as possible.
Field 5: This field defines the maximum number of links this class
will allow from automatic connections. Using /CONNECT overrides this
feature.
Field 6: This field defines the 'sendq' value for this class. If this
field is not present, the default (from config.h) is assigned.
NOTE: leaving any of the fields out means their value is 0 (ZERO)!!
example:
Y:23:120:300:5
define class 23 to allow 5 auto-connections, which are checked every
300 seconds. The connection is allowed to remain silent for 120
seconds before a PING is sent. NOTE: fields 3 & 4 are in seconds.
You may also give I lines a class (again the sixth field to define
which class). This is only usefull (currently) for redefining the
ping frequency. It can also be useful as a diagnostic to see how
much each I line is used when combined with the TRACE output.
Another feature of connection class is the ability to do automatic
routing by using the class as a 'priority'. If you are connected
to a server which has a class lower than one of the servers that is
'behind' it, the server will disconnect the lower class one and
schedule a 'new' connection for the higher class server.
10. Leaf Connections.
To stop servers which should only act as leaves from hubs becoming
hubs accidently, the L line was introduced so that hubs can be aware
of which servers should and shouldnt be treated as leaves. A leaf
server is supposed to remain a node for the entirity of its life
whilst connected to the IRC server network. It is quite easy, however
for a leaf server to be incorrectly setup and create problems by
becoming a node of 2 or more servers, ending its life as a leaf. The
L line enables the administrator of an IRC 'Hub server' to 'stop' a
server which is meant to act as a leaf trying to make itself a hub.
If, for example, the leaf server connects to another server which doesnt
have an L-line for it, the one which does will drop the connection, once
again making the server a leaf.
L::*::
Field: 1 2 3 4 5
Field 2 is a mask of which servers the leaf-like attributes are used on
when the server receives SERVER messages. The wildcards * and ? may be
used within this field for matching purposes. If this field is empty,
it acts the same as if it were a single * (ie matches everything).
Field 4 is the the server connectted to you that for which you want to
enforce leaf-like attributes upon.
Field 5 is the maximum depth allowed on that leaf and if not specified,
a value of 1 is assumed. The depth is checked each time a SERVER message
is received by the server, the hops to the server being the field checked
against this max depth and if greater, the connection to the server that
made its leaf too deep has its connection dropped.
For the L-line to come into effect, both fields, 2 and 4, must match up
with the new server being introduced and the server which is responsible
for introducing this new server.
11. Service Connections (Not yet implemented)
Introduction.
The Service is a special kind of IRC client. It does not have the full
abilities of a normal user but can behave in a more active manner than
a normal client. Services as they stand now are not fully implemented.
The following line can be added to your ircd.conf file to enable a
service:
S:::
Field: 1 2 3 4
Explanation:
Field 2:
The host mask should be set to match the hosts(s) from which the
service will be connecting from. This may be either an IP# or full
name (prefered).
Field 3:
This is the password which must be passed in the SERVICE command.
Field 4:
The 'service name' is only used for the purpose of finding the
right S-line from the ircd.conf file for password matching. The
actual service name used is that set by NICK commands prior to
SERVICE being sent.
To connect a service to your server, you must first create an S-line
entry in your ircd.conf file and get your server to read this in (ie
rehash or reboot). Once your server has updated itself, you can then
attempt to register your connection as a service.
Registering as a service is similar to registering as a normal user
except that you must send NICK first and then SERVICE. The service
command should look something like this:
SERVICE secretpassword referencename :Service information
A successfull registering of a service at the server will result in
a RPL_YOURESERVICE (383) being sent back to you. Any other reply as
a result of sending service indicates an error has occured.
A service is not a very useful sort of client, it cannot join channels
or issue certain commands although most are available to it. Services,
however, are not affected by flood control. It is therefore wise to
oversee the use of S-lines with some care.
12. Port Connections
Introduction.
The port line adds flexibility to the server's ability to accept
connections. By use of this line in the ircd.conf file, it is easy
to setup both Unix Domain ports for the server to accept connections
on as well as extra internet ports.
P::<*>:<*>:
Field: 1 2 3 4 5
or
P::<*>:<*>:
Field: 1 2 3 4 5
Explanation
Internet Ports
Field 1
The internet IP mask defines where connections may come from and
be accepted. The IP mask uses either *'s or 0's as wildcards. The
following two lines are the same:
P:128.2.*:::6664
P:128.2.0.0:::6664
The incoming isnt matched against the mask, rather the ip# string
is decoded and compared segment by segment. Thus
P:128.2*.1.2:::6664
will not match 128.20.1.2.
Field 5
The port number field tells the server which port number it should
listen on for incoming connections.
Unix Socket Ports.
Field 1
The path set in field 1 should be the directory name in which to
create the unix socket for later listening to. The server will
attempt to create the directory before creating the unix socket.
Field 5
The port field when used in combination with a pathname in a P-line
is the filename created in the directory set in Field 1.
Example:
P:/tmp/.ircd:::6667
Creates a unix socket in the /tmp/.ircd directory called "6667".
The unix socket (file) must be a numerical.
13. Hub Connections
In direct contrast to L-lines, the server also implements H-lines to
determine which servers may act as a hub and what they may 'hub for'.
If a server is only going to supply its own name (ie act as a solitary
leaf) then no H-line is required for, else a H-line must be added as
follows:
H::*:
Field: 1 2 3 4
Explanation:
Field 2
All servers that are allowed via this H-line must match the mask
given in this field.
Field 4
This field is used to match exactly against a server name, wildcards
being treated as literal characters.
Examples:
H:*.edu:*:*.bu.edu
Allows a server named "*.bu.edu" to introduce only servers that
match the "*.edu" name mask.
H:*:*:eff.org
Allow "eff.org" to introduce (and act as a hub for) any server.
Note: It is possible to have and use multiple H-lines (or L-lines) for
the one server. eg:
H:*.edu:*:*.bu.edu
H:*.au:*:*.bu.edu
is allowed as is
L:*.edu:*:*.au
L:*.com:*:*.au
Appendix A: Difference between IP addresses and hostnames
There are 2 different types of INTERNET addresses, NAME addresses and
NUMERIC addresses. NAME addresses look like ENGLISH words (and indeed
they are ENGLISH words that refer to a given host). A NAME address looks
like "tolsun.oulu.fi" - and that particular address refers to the machine
named TOLSUN in Finland. It is a UNIQUE address because no other machine
in the world has its NAME address the same as "tolsun.oulu.fi". Anytime
you say "telnet tolsun.oulu.fi" - you would always connect to TOLSUN in
Finland. NUMERIC addresses refer to those addresses that are made up of
NUMBERS for example "128.214.5.6" is the NUMERIC address for TOLSUN. This
address is also UNIQUE in that no other machine in the world will be use
those NUMERIC numbers. The NUMERIC address is usually more reliable than
the NAME address because not all sites can recognize and translate the
NAME address into it's numeric counterpart. NUMERIC always seems to work
best, but use a NAME address when you can because it is easier to tell
what host you are connected to.
Every Unix machine has a file called "/etc/hosts" on it. This file
contains NAME and NUMERIC addresses. When you supply IRC with a NAME
address it will at first try to find it in /etc/hosts, and then (if it's
really smart), use the local Domain Name Server (DNS) to find the NUMERIC
address for the host you want to connect to. Thus if you plan to use NAME
addresses keep in mind that on SOME sites the entry for the TARGET machine
must be found in /etc/hosts or the NAME address will fail. A typical
entry in /etc/hosts looks like this:
130.253.1.15 orion.cair.du.edu orion.du.edu orion # BSD 4.3
This particular example is the Host ORION at the University of Denver.
Notice that on the far left is the NUMERIC Address for orion. The
next few ENGLISH words are the NAME addresses that can be used for orion,
"orion.cair.du.edu", "orion.du.edu", "orion". ALL of these NAME addresses
will return the NUMERIC address "130.253.1.15" which IRC will use to
connect to the TARGET UNIX. (when I say TARGET UNIX I am refering to the
UNIX you want to connect to for IRC). Any futher questions about
/etc/hosts should be directed to "man hosts".
Appendix B: Enabling Summon Messages
+-----------------------------------------------------------------------+
| E N A B L I N G / S U M M O N M E S S A G E S |
+-----------------------------------------------------------------------+
*NOTE* You must have ROOT or special access to the GROUP tty ('/dev')
to do this. If you want to allow users around the world to summon
users at your site to irc, then you should make sure that summon works.
The "IRCD" program needs access to the GROUP of '/dev'. This
directory is where user TTY's are stored (as UNIX treats each Terminal
as a FILE!) IRCD needs GROUP ACCESS to /dev so that users can be
SUMMONED to the program by others users that are *in* the program.
This allows people from other Universities around the world to SUMMON
your users to IRC so that they can chat with them. Berkeley, SUN, HP-UX
and most of the newer versions of UNIX check to see if a USER is
accepting MESSAGES via the GROUP access rights on their TTY listing
in the /dev directory. For example an entry in '/dev' looks like this:
(Unix Path on BSD 4.3 UNIX is: /dev/ttyp0)
crw------- 1 jtrim 20, 0 Apr 29 10:35 ttyp0
You will note that 'jtrim' OWNS this terminal and can READ/WRITE to this
terminal as well (which makes sense because I am ENTERING DATA and
RECEIVEING DATA back from the UNIX). I logged into this particular
UNIX on "April 29th" at "10:35am" and my TTY is "ttyp0". But further
of *note* is that I do not have my MESSAGES ON! (mesg n) -- This is
how my terminal would look with MESSAGES ON (mesg y):
crw--w---- 1 jtrim 20, 0 Apr 29 10:35 ttyp0
With my MESSAGES ON (mesg y) I can receive TALK(1) requests, use the
UNIX WRITE(1) command and other commands that allow users to talk
to one another. In IRC this would also allow me to get IRC /SUMMON
messages. To set up the "IRCD" program to work with /SUMMON type
the following: (using ROOT or an account that has access to '/dev').
% chgrp tty ircd
% chmod 6111 ircd
The above commands read: "Give IRCD access to GROUP tty (which is /dev)
and then when ANYONE runs the IRCD allow SETUID and SETGID priviliges
so that they can use the /SUMMON command.